Friday, Oct 18, 2013 |
||
Time |
Theme |
Speaker |
09.00 –09.30 a.m. |
Registration |
|
9:30 – 9:45 a.m. |
Opening Ceremony-unveiling ceremony |
|
09.45 –10.15 a.m.
|
Welcome Speeches |
Prof. Gang Pei, President of Tongji-University Prof. Yang Zhigang, Dean of School of Mechanical Engineering Prof. Christian Bode, CDH/CDHK-Representative ofGerman Academic Exchange Service Prof. Wu Zhihong,Deputy Directorof Chinese-German School for Postgraduate Studies Tongji-University |
10.15 –10.45 a.m. |
Opening Words of the Donors |
Lucy Xiao, General Manager of Vogel Business MediaChinaand other representatives of donors Dr. Heiner Lang,MAG Jie Ping,Vice President, Zeiss Dr. Li Zhang, Siemens |
10:45 –11:00 a.m. |
Introduction of AMTC |
Board of Management Advanced Manufacturing Technology Center: Prof. Jürgen Fleischer,Guest Professor of Tongji |
11:00 – 11:30 a.m. |
Keynote: Sustainable Manufacturing Technology for a Booming Market |
Prof. Jürgen Fleischer,Board of Management Advanced Manufacturing Technology Centert |
11:30 – 12:00 a.m. |
Keynote: The trends of the transformation, upgrade and cooperation of China's machine tool industry |
Dr. Ömer Sahin Ganiyusufoglu, Shengyang Machine Tool |
12:00 – 12:30 p.m. |
Lubricants for the Future |
Glenn Perkins, Director Business Development, Industrial Lubricants, FUCHS Lubricants (China) Ltd. |
12:30 –1:50 p.m. |
Visiting AMTC, Lunch |
|
1:50 –2:10 p.m. |
Advanced Machining Solutions for Engine Manufacturing |
Dr. Heiner Lang, COO MAG |
2:10 –2:30 p.m. |
Advanced Metrology – The Combination of CMM and Tomography |
Roger BAYER, Vice President Sales China/Taiwan Carl Zeiss Industrie Messtechnik GmbH |
2:30 –2:50 p.m. |
Industrial Robotics for Flexible Automated Handling and Assembly |
Yang Tang,R&D Manager ABB |
2:50 –3:10 p.m. |
Siemens Digital Factory Solution |
Bernhard KROCZEK, Principle Consultant,SIEMENS Industry Software |
3:10 –3:40 p.m. |
High Precision Surface Texture Finishing of Crankshafts and Camshafts |
Peter Krumrey, Senior Manager of Thielenhaus (Shanghai) Co., Ltd |
3:40 –4:00 p.m. |
Coffee Break |
|
4:00 –4:20 p.m. |
Machining of Aluminum Ceramic Composite Material |
Prof. Zhang Weimin, Board of Management Advanced Manufacturing Technology Center MAG Endowed Chair, CDHK |
4:20 –4:40 p.m. |
Advanced Services for the Manufacturing Industry |
Prof. Horst Meier, Board of Management Chair of Production Systems (LPS) Ruhr-Universität Bochum |
4:40 –5:00 p.m. |
Manufacturing in Networks |
Prof. Gisela Lanza, Board of Management wbk Institute of Production Science Karlsruhe Institute of Technology |
5:00 –5:20 p.m. |
New Engine Manufacturing Technology |
Prof. Zhang Shuqiao, Workshop Director, SVW Engine Factory |
5:20 –5:40 p.m. |
New Production Models for Flexible Manufacturing - Open Core Engineering |
Dr. Roland Steffan, Sales Product Management Director of Factory Automation Bosch Rexroth |
5:40 –6:00 p.m. |
Concluding Remarks |
Prof. Jürgen Fleischer, Board of Management Advanced Manufacturing Technology Center |
6:00 –7:00 p.m. |
Dinner |
获取更多评论